Patient Oral Feeding Syringe with Cap for Fixed Nutrition and Medication

product

Patient Oral Feeding Syringe with Cap for Fixed Nutrition and Medication

Short Description:

New Design Oral Syringe With Tip

Easily deliver the correct dose of medication and feeding.

For single patient use only

Washing immediately after use, using warm soapy wate

Validated for use up to 20 times


Product Detail

Product Tags

Description

1. Full range of size with cap by ISO5940 or ISO80369
2. Permanent and heat -etched dual graduations with more safety
3. Special tip design will not accept hypodermic needle for safety
4. Latex free rubber and silicone O-ring plunger for option
5. Multiple using with silicone O-ring plunger design
6. ETO, Gamma ray, High temperature sterilization for option

Application

Feeding Syringes are designed specifically for enteral processes. These processes include initial tube placement, flushing, irrigation and more. The connector reduces the risk of misconnections to the tubing. Also, the body is clear for easy measuring against the clearly marked graduated length markings. The clear body also permits you to visually check for air gaps.

In addition, the oral syringes are latex, DHP, and BPA free making them safe to use on a wide variety of individuals. They are designed for single patient use as well to prevent cross contamination.

The feeding syringe works well with feeding sets such as this Gravity Feed Bag Set or Gastrostomy Feeding Tube.

Cleaning

Wash immediately after use, using warm soapy water
Pull the plunger all the way out and wash separately, Repeat this for the adaptor
Rinse all components under cold water
Store in a clean dry container

Our Services

Do not freeze, autoclave or microwave.
Please follow instructions carefully
1. Fit adaptor firmly into neck of medicine bottle
2. Hold empty syringe and draw out plunger to dosage mark required
3. Fit syringe into bottle adaptor an invert bottle
4. Push in plunger fully and then slowly draw out medicine to dosage mark required
5. Check for any air bubbles in the syringe, if any are present repeat step 4 until bubbles disappear.
6. To measure dose accurately, line upper black ring on plunger with the required dosage mark
7. Place medicine bottle upright and remove syringe, check dosage accurately again
8. Check patient is sitting or held upright before giving medicine
9. Place syringe towards inside of cheek and slowly release plunger, giving the patient time to swallow, rapid squirting of medicine can cause choking.

Product Use

Before use, please read the instructions overleaf
Accurately measure up to 5ml
For single patient use only
Validated for use up to 20 times

Product Show

Feeding syringe 2
Feeding syringe 7

Product Video


  • Previous:
  • Next:

  • Write your message here and send it to us